Model
Danby Designer DCR032A2*
Rank #129 means 128 of the 1,000 refrigerator models we track cost less to run each year; the 21st efficiency percentile means it uses less energy for its size than 21% of those models.
What does the Danby Designer DCR032A2* cost to run per year?
At $40 a year to run, the Danby Designer DCR032A2* is among the cheapest refrigerator models we track, ranking #129 of 1,000. It uses 11% less energy than the U.S. federal standard model in its class, which would cost about $45/yr to run, a saving of roughly $5 a year. Its 21th size-adjusted efficiency percentile is a step behind the class median, though not among the weakest results. At 3.2 cu ft, it is a small refrigerator for the class, which runs 1.2 to 31.7 cu ft; size and efficiency are the two levers behind the figure above, and this dataset does not carry a separate efficiency-factor column for this class.
Immediately around it on the leaderboard, the Bud Light FR321-BULT-COM at $40/yr runs a little cheaper and the Frigidaire Gallery FGFR334 at $40/yr runs a little more, a sense of how tightly models are packed at this point in the ranking. A refrigerator typically stays in service for somewhere around 12 years; over that span, the Danby Designer DCR032A2*'s $40/yr adds up to roughly $480 in electricity alone, before purchase price or repairs.
Also sold as: Bangson US-BSR-100.
By the numbers
The Danby Designer DCR032A2* normalized against its whole class, so each figure means something.
What it costs you over time
Running cost is an every-year number, so it compounds. At $40/yr, here is what the Danby Designer DCR032A2* adds up to before purchase price, water, or repairs enter the math.
Left running for a decade at today's US average rate, the Danby Designer DCR032A2* costs about $400. That is roughly $50 less than a standard model in its class, which would run closer to $450 over the same ten years.
How the Danby Designer DCR032A2* compares
The refrigerator class we track runs from $8 to $149 a year. At $40/yr, it runs about $24 a year cheaper than the class median of $64, and it is about $32 a year more than the cheapest refrigerator to run at $8. Against the US federal standard model for its class at about $45/yr, the Danby Designer DCR032A2* uses 11% less energy.
What drives its running cost
At 3.2 cu ft, the Danby Designer DCR032A2* is a small refrigerator for its class, which spans 1.2 to 31.7 cu ft with a median of 12.6 cu ft, and smaller refrigerator models generally cost less to run for the same job, all else being equal.
- Interior volume. Cubic feet of interior volume is the first thing that scales a fridge's running cost up or down, before compressor quality even enters the picture.
- Counter depth vs standard depth. Counter-depth models sit flush with cabinets but usually hold less interior volume than a standard-depth model of the same width, which can nudge the per-cubic-foot running cost either way.
- Compressor technology. Newer variable-speed (inverter) compressors modulate output instead of cycling fully on and off, which tends to use less energy for the same cooling job than an older fixed-speed compressor.
- Placement and ventilation. A fridge pushed tight against a wall or cabinet, or standing next to an oven or in direct sun, works harder to shed the heat its compressor produces, which can push real-world cost above the published figure.
Common questions
Is the Danby Designer DCR032A2* cheap to run?
Yes, relatively. At $40 a year it ranks #129 of 1,000 refrigerator models we track, in the cheaper part of its class to run.
How much does the Danby Designer DCR032A2* cost per month?
Roughly $3.37/mo, spreading the $40/yr estimate evenly across twelve months at $0.1856/kWh. Actual monthly bills swing with your rate and usage pattern.
How is this running-cost figure calculated?
We take the model's published annual energy use of 218 kWh from ENERGY STAR and multiply it by the US average residential electricity rate of $0.1856/kWh, giving about $40 a year. It is an electricity-only estimate and does not include purchase price, water, or installation.
How efficient is the Danby Designer DCR032A2* for its size?
21st percentile once size is factored in. That means its size-adjusted efficiency is not the main reason for the running-cost figure above; its capacity plays a large role too.
Cheaper to run in the same class
| Rank | Model | Cost/yr |
|---|---|---|
| 134 | Bud Light FR321-BULT-COM3.2 cu ft | $40 |
| 133 | Bangson US-BSR-1073.2 cu ft | $40 |
| 132 | Bangson US-BSR-1033.2 cu ft | $40 |
| 131 | Bangson US-BSR-101-33.2 cu ft | $40 |
| 130 | Bangson US-BSR-100A3.2 cu ft | $40 |
Source
ES_0031682_DCR032A2*_06102014033951_2718267View certified refrigerator listingsENERGY STAR data as of July 2026Danby Designer and DCR032A2* are used here for identification only and are not endorsements. Figures are computed by WattWise Labs from public ENERGY STAR data, not measured in our own lab.